Job Responsibilities
1. Plan and manage the equipment layout in the factory; improve the FAB space utilization and optimize the material flow line.
2. Develop the expansion plan according to the strategic objectives of the company and track the progress of equipment incoming, installation and commissioning.
3. Be responsible for cost system modeling, BOM & material cost maintenance, cost sharing, optimization and improvement, as well as new product standard cost estimation.
4. Control Capex budget, assist in financial depreciation cost estimation, direct staffing and review, etc.
5. Coordinate the development and monitoring of annual budget and capital expenditure.
6. Be responsible for capacity, overall equipment effectiveness (OEE), and wafer per hour (WPH) calculation.
7. Analyze and optimize production efficiency indexes.
8. Conduct tracking and accounting of cost reduction projects
Position Qualifications：
1. Bachelor’s degree or above
2. 5 years of IE experience or so in wafer manufacturing industry
3. Familiar with lean production concept and Industrials Engineering (IE) 7 Tools
4. Proficiency in AutoCAD, MS, Office, Project, Excel, and Powerpoint
Job Responsibilities:
1. Manage the use of defect detection equipment and establish defect detection recipe and sampling rule;
2. Use various analysis tools proficiently to obtain defect morphology and composition, classify defects, and determine their causes;
3. Establish product defect database, determine defect risk with product engineers, and assist process and product departments in developing monitoring plans for equipment and products;
4. Highlight abnormal equipment and processes and work with process, product, and quality engineers to develop defect improvement projects to enhance product yields;
5. Develop and implement training plans for YE position.
Position Qualifications:
1. Bachelor’s degree or above;
2. More than three years of YE experience in Fab plants, with experience in the use of defect management software and equipment;
3. Familiar with YE data analysis (defect density, defect classification, etc.) and proficient in data statistics and analysis;
4. Good data consolidation and report writing skills;
5. Good communication, interpersonal, and organizational skills;
6. Strong analytical and problem solving skills.
Job Responsibilities:
1. Track product lot situation, identify potential problems leading to low yield, analyze causes of anomalies, propose preventive improvement measures, and maintain stable product yield through in-line process, WAT and CP data analysis;
2. Manage the Process Flow List of chip products;
3. Promote yield enhancement projects in epitaxy, process, product development, and other related departments to improve product yields;
4. Monitor SPC stability at the CP side and analyze the causes of SPC fluctuations;
5. Perform window validation for key processes and improve process windows to meet mass production requirements;
6. Evaluate the productibility of new processes and products.
Position Qualifications:
1. Master’s degree or above, majoring in microelectronics, materials, physics, chemistry or other related fields;
2. More than three years of PIE experience in semiconductor industry, compound semiconductor experience preferred;
3. Good data analysis and logical thinking skills, familiar with knowledge related to SPC, FEMA, DOE, etc.;
4. Ability to work well across departments and functions;
5. Hard-working spirit, conscientious and responsible work attitude.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Participate in the development of new products and processes for GaN HEMT devices;
2. Be responsible for tape-out management and exception handling, as well as tape-out performance index analysis summary;
3. Be responsible for chip sorting and test docking;
4. Analyze tape-out anomalies;
5. Develop new test technologies;
6. Conduct product development documentation.
Position Qualifications:
1. Bachelor’s degree or above, majoring in microwave, electronics, physics, mathematics, and computer related fields;
2. Two or more years of related work experience, mastering basic semiconductor physics knowledge, experience in layout drawing preferred;
3. Proficiency in Excel, with VBA and other programming experience.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Be responsible for writing PDK related codes;
2. Be responsible for processing layout data;
3. Be responsible for writing related documents.
Position Qualifications:
1. Bachelor’s degree or above, majoring in electronics, computer, and communications related fields;
2. Two or more years of relevant work experience, layout drawing experience highly preferred;
3. Good communication skills and learning ability, calm and attentive personality;
4. Knowledge of any programming language preferred;
5. Good English reading and writing skills.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Establish a systematic screening test system and develop effective screening methods to ensure the reliability of shipped products;
2. Partially participate in the research of product failure mechanism and develop the corresponding screening methods based on the failure mechanism;
3. Establish the relationship between internal screening and customer applications and improve the effectiveness of internal screening methods.
Position Qualifications:
1. Bachelor’s degree or above;
2. Five or more years of experience in developing screening methods for semiconductor components;
3. Familiar with semiconductor and reliability, able to apply systematic screening methods to ensure product reliability;
4. Ability to complete projects independently.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Establish and improve test platforms, conduct procurement and evaluation of new equipment, and carry out construction, introduction into mass production, and post maintenance to meet R&D and mass production requirements; conduct carrier development and roll out test capacity;
2. Carry out test program development, modification, storage, and maintenance management;
3. Output and analyze test data to ensure their accuracy;
4. Perform design/production/procurement/maintenance of probe cards/PIB, etc.;
5. Conduct test exception handling analysis and improvement to support production line and maintain stable mass production;
6. Improve test yield and solve yield loss due to test process;
7. Conduct test process optimization and system development to improve test system automation, accuracy and operability;
8. Evaluate suppliers, test methods, test platforms, and reduce test costs;
9. Coordinate with other departments to support new product development and testing, assist in improving process, yield and production flow.
Position Qualifications:
1. Bachelor’s degree or above, majoring in electronics, microelectronics, measurement and control technology, circuit design and related technical fields;
2. Three or more years of experience in semiconductor testing and circuit design;
3. Proficiency in at least one programming language such as VB, MATLAB, and C++;
4. Knowledge of using probe stations, vector network analyzers and other measurement instruments preferred;
5. Good communication skills, able to work independently, passionate about test work, treating people sincerely, meticulous and patient, pragmatic and diligent, with a strong sense of responsibility and efficient execution.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Be responsible for the installation and commissioning of new incoming equipment;
2. Be responsible for the routine maintenance and repair of equipment;
3. Lead various equipment optimization work to improve equipment utilization and service life;
4. Support process engineers to solve equipment process problems and improve product yields and efficiency;
5. Be responsible for preparing the revision of quality documents for the equipment under own responsibility;
6. Be responsible for the training and guidance of assistant equipment engineers and technicians.
Position Qualifications:
1. Strong hands-on skills and teamwork spirit;
2. Good sense of customer service and ability to identify and solve problems;
3. Conscientious, positive, and proactive at work with a strong sense of responsibility;
4. Able to work under pressure, good at learning new knowledge and technology, dare to take on challenges;
5. More than 1 year of working experience in semiconductor front-end equipment, experience in VARIAN injector, ULVAC evaporator, and applied material PVD equipment operation preferred;
6. Bachelor’s degree, majoring in mechanical, electronic technology, automation, and other related fields;
7. Proficient in using office software, with certain English reading skills.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Be responsible for solving and improving process abnormalities in production lines and maintaining process stability;
2. Be responsible for improving process SPC monitoring of each module, identifying and solving problems therein;
3. Be responsible for adjusting and maintaining the in-process product menu, reducing process defects, improving process conditions, and enhancing yields;
4. Be responsible for the research and development of processes related to productibility enhancement and capacity improvement;
5. Be responsible for updating process-related specification documents.
Position Qualifications:
1. Bachelor’s degree or above;
2. Background in microelectronics, materials, chemistry, and other related specialties;
3. Three or more years of relevant work experience, Fab work experience preferred; familiar with crystal back, wet method, photolithography, etching, and thin film related processes;
4. Active and aggressive, passionate, good at communication, team player, with a strong sense of responsibility.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Be responsible for the routine maintenance of pure water, waste water, chemicals, water supply and drainage systems;
2. Handle system accident emergency, consolidate spare parts, and establish equipment operation files, etc.;
3. Be responsible for developing various energy saving and improvement plans and leading their implementation;
4. Be responsible for preparing system SOPs and budgeting.
Position Qualifications:
1. Full-time bachelor’s degree, majoring in chemistry, chemical engineering, environmental engineering preferred;
2. More than 2 years of pure water and wastewater treatment work experience in semiconductor plants, engineering project experience preferred;
3. Management experience in large and medium-sized semiconductor and panel industry preferred.
4. Strong capability of logic thinking, good writing and communication skills.
5. Proficient in using various office software, familiar with CAD, etc.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
CN
