Job Responsibilities:
1. Review the preliminary design of products from the perspective of manufacturability and producibility before A Gate of product development;
2. Participate in the review of tube amplifier product design process (DIE Attachment, Wire Bonding, and other process steps) to meet the mass production requirements;
3. Participate in the Review of the DOE Plan of the amplifier product design, lead the analysis of DOE data, and provide Action Suggestion for subsequent DOE analysis;
4. Participate in the introduction of Review amplifier test platform, including the formulation of test introduction standards, Original Test Spec, and Initial Test Spec development;
5. Lead the analysis of test data in Trial Run stage and participate in the development of reasonable Final Test Spec from A Gate to V Gate stage of product development to ensure the yield of subsequent mass production;
6. Lead the analysis of each lot data in the E Lot test stage, obtain statistical analysis results, and provide suggestions on how to handle the E Lot in the test line;
7. Be responsible for collecting various process and test data during the Trial Run stage after the product Trial Run and prepare a comprehensive Trial Run Report;
8. Participate in the review of reasonable Final Test Spec formulation;
9. Lead the investigation of various product anomalies during the Trial Run stage;
10. Participate in reviewing the whole process control plan for product production;
11. Conduct continuous monitoring of product production yield, analyze yield data, set yield goals and measures for continuous improvement in product development through the V Gate into the M Lot production stage;
12. Lead the handling of low yield cases in the mass production process of production line;
13. Lead the handling of customer complaint cases regarding quality in the product problem investigation stage.
Position Requirements:
1. Master’s degree, majoring in semiconductor, physics, microelectronics, electronics, mechanical electronics, and other related fields.
2. Familiar with packaging process.
3. Good logical analysis, learning, and interpersonal communication skills.
Job Responsibilities:
1. Be responsible for the routine maintenance, update and evaluation of the Keysight ADS platform-based design kit (PDK);
2. Be responsible for writing model codes and importing into the design kit (PDK);
3. Be responsible for preparing technical documents related to the design kit (PDK);
4. Participate in project development and provide customized modeling services to customers.
Position Requirements:
1. Master’s degree or above, majoring in electronic science and technology, microelectronics, computer, electromagnetic field and microwave technology, integrated circuits, and other related fields;
2. Familiar with basic electronic components knowledge and circuit principles;
3. Programming ability and familiarity with semiconductor manufacturing process preferred;
4. Strong ability to learn new knowledge and proactive working attitude;
5. Good teamwork spirit.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Undertake and lead the process of new chip product development;
2. Develop product design and test plans;
3. Set product index SPEC;
4. Track product development tape-out;
5. Perform pre-A Gate product tracking, yield improvement, product exception analysis and handling, FT exception and customer complaint handling;
6. Assist PIE in post-A Gate product exception analysis and processing.
Position Requirements:
1. Master’s degree, majoring in microwave RF, communication circuit, microelectronics, electronics, and other related fields;
2. Familiar with semiconductor fundamentals;
3. High communication and coordination skills, strong learning ability, self-driven and proactive.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Identify the potential problems leading to low yield through in-line process and WAT/CP big data analysis;
2. Trace the cause of low yield abnormalities and continuously improve the yield rate through tape-out big data, GaN HMET electrical failure, and GaN HMET physical failure analysis;
3. Promote the yield enhance projects in epitaxy, process, product development and other related departments and verify the effect;
4. Improve the SPC guarantee system to maintain the stability of chip product yield;
5. Be responsible for the integration and optimization of chip product process;
6. Manage the Process Flow List of chip products;
7. Manage chip products to meet the requirements of downstream customers.
Position Requirements:
1. Master’s degree, majoring in microelectronics, materials, physics, chemistry, and other related fields;
2. Proficiency in the establishment and use of data analysis software for yield enhancement;
3. Familiar with SPC, statistical analysis and other tools;
4. High motivation and excellent ability to lead and communicate across departments and cross-functional teams.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Be responsible for the construction and routine maintenance of electrical characteristics test systems for semiconductor devices;
2. Develop new test techniques and evaluation methods for third-generation semiconductors;
3. Conduct test program preparation and test result generation and analysis;
4. Collaborate with device and process engineers in the development of device and process technologies.
Position Requirements:
1. Bachelor’s degree or above, majoring in microelectronics, electronic information, and other related fields;
2. Proficiency in VB, MATLAB programming language; knowledge of using probe station, vector network analyzer, and other measurement instruments preferred;
3. Good communication skills, able to work independently, passionate about test work; treating people sincerely, meticulous and patient, pragmatic and diligent, with a strong sense of responsibility.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Undertake Demo performance evaluation and its test verification;
2. Assist RF engineers in completing tube amplifier evaluation and test verification tasks;
3. Assist relevant departments in completing part of the production technical support work;
4. Assist the lab manager in completing part of the routine laboratory tasks.
Position Requirements:
1. Bachelor’s degree, majoring in microelectronics, electromagnetic field microwave, electronics, and communications related fields;
2. Familiar with the theoretical foundation and design knowledge of RF circuits, design principles, and test methods of power amplifiers;
3. Familiar with the use of RF instruments; good English reading and writing skills;
4. Recognizing the company’s core values, vigorous, enthusiastic, active, and hard-working; with the awareness and ability to learn new knowledge proactively, good presentation skills.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Be responsible for the installation and commissioning of new incoming equipment;
2. Be responsible for the routine maintenance and repair of equipment;
3. Lead the optimization of equipment to improve the utilization and service life;
4. Support process engineers to solve equipment process problems and improve product yields and efficiency;
5. Be responsible for preparing revisions of quality documents for the equipment under own responsibility;
6. Be responsible for training and guiding assistant equipment engineers and technicians.
Position Requirements:
1. Bachelor’s degree, majoring in mechanical, electronic technology, automation, optics, instrumentation, and other related fields;
2. Proficiency in using office software, with certain English reading skills.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Build and optimize reliability experimental platforms;
2. Formulate and improve reliability testing standards and processes;
3. Lead the reliability identification and report preparation for new processes and products;
4. Conduct research and analysis of failure mechanisms for further improvement in reliability;
5. Serve external customers efficiently as a window and continuously improve their satisfaction.
Position Qualifications:
1. Master’s degree, majoring in microwave, electronic engineering, circuit, and semiconductor related fields.
2. Understanding of the physical basis of semiconductor devices and manufacturing processes, mastery of basic principles and methods of device reliability evaluation preferred.
3. Proficiency in using office software to write technical documents and data processing, good English reading and writing skills.
4. Excellent communication skills and teamwork spirit, honest, studious and responsible.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Assist in the development of new products and the commissioning and introduction of related epitaxial processes;
2. Be responsible for adjusting the routine growth procedure of MOCVD;
3. Be responsible for handling anomalies in the production process;
4. Be responsible for routine maintenance of MOCVD and handling of anomalies;
5. Assist in the characterization of material properties.
Position Requirements:
1. Master’s degree, majoring in electronics, microelectronics, materials, and physics related fields.
2. Research on related projects, good understanding of the MOCVD system, practical hands-on capability, XRD, AFM, Hall testing skills preferred.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
Job Responsibilities:
1. Design and develop GaN epitaxial growth process and accomplish epitaxial material growth tasks;
2. Complete epitaxial process optimization based on material testing and downstream device result feedback;
3. Conduct MOCVD system maintenance.
4. Be responsible for epitaxial growth standard process development, training and guidance for related personnel.
Position Requirements:
1. PhD degree, majoring in electrical engineering, physics, and other related fields.
2. Experience in using MOCVD.
3. Skills in XRD, AFM, and Hall testing.
4. PhD thesis related to GaN material and devices;
5. Good understanding of the MOCVD system and practical hands-on capability.
Contact Information:
E-mail: hr_sz@dynax-smei.com
Tel: 0512-36886888-8118
Company website: www.dynax-semi.com
CN
